Published: Sep 14, 2026
Updated: Sep 14, 2026
| Name | Anonymous (Mr M) |
| Age | In their 30s |
| Concern | Thinning from the center through the crown and around the whorl, and hair that has become finer |
| What he asked for | Cover the thinning at the crown naturally and keep the sides from puffing out |
| Everyday styling | Uses a dryer, and mostly sweeps everything back |
Thinning at the crown and the whorl, and hair that has got finer
Client M, in his 30s, had started to notice thinning from the center through the crown and around the whorl.
He used to have so much hair it was a problem, but it has gradually got finer, and now he struggles to get any volume on top.
The hair at the sides and back, meanwhile, still grows in well, so a while after a cut he ends up with little on top and length at the sides.
So until now he had been clipping the sides and back to about 6 mm and taking the top to match.
The point here, though, was not simply to cut everything short.
The sides come in tight while the crown keeps the length it needs, and the flow of the hair does the covering.
Why the consultation pointed to not cutting it too short

He had been cutting the top quite short, on the assumption that shorter hair would show the thinning less.
Looking at the hair, though, the top was a little too short to do any covering.
Around the whorl in particular, another centimetre or two would widen the area the hair can be layered over.
So this time we decidedSo we decided not to cut the top more than necessary and to let it grow a little at a time.
With thinning hair, shorter is not automatically better.
What matters is separating what to cut from what to keep, looking at where it is thin, where hair remains, how it grows and which way it falls.
The cut: tight sides to let the volume on top work
1. Sides clipped to 9 mm as a base
His sides grow quickly, and the area near the sideburns puffs out easily.
We clipped the sides to 9 mm as a base and took the parts that puff out down to about 4 mm.
Taking the width out makes the top read as higher by comparison.
2. Deliberately not cutting much off the top
This time the crown was not taken much shorter — just tidied into shape.
Another centimetre or two of growth will build the weight needed to cover the area round the whorl more naturally.
Not "cut it short because it is thin", but "keep the length needed to cover what is thin" — that is an important way to think about cutting thinning hair.
3. Style the hair round the whorl against its natural flow
With his whorl, sweeping everything back along its natural flow left places where the hair parted and the scalp showed.
So we styled it taking the hair the opposite way to the whorl.
Going against the flow lifts the roots and layers hair over the thinner areas, so the crown reads as denser.

The key: from sweeping it all back to letting it fall forward
He had been using a dryer to sweep everything back, close to an all-back style.
That looks neat from the front, but with thinning at the crown, sweeping it back can open a parting round the whorl and show the scalp.
This time we moved everything but the fringeforward rather than back.
Lifting only the roots of the fringe keeps the forehead clean while the crown keeps its natural volume.
It does not look as though the crown is being hidden, and the silhouette holds from the front and the side.
Before and after: changing the flow alone changes the crown

Before the cut, the top was short against the volume at the sides, so the difference in density at the crown showed.

The sides came in, the top stayed, and the flow was turned forward.
Drying against the flow of the whorl lifted the roots and gave the top natural height and weight.
Another centimetre or two on top should make the crown easier to cover still.
Checking the finish from four angles

Tight sides make the whole head compact, which brings out the height on top. Lifting only the fringe keeps it light rather than heavy.
.

Taking the sides short, where they puff out, cleans up the line running from the top round to the back.
.

From the side there is natural height on top, and it does not look as though the crown is being hidden.
.

The flow around the whorl mattered most here. Taking the hair against the way it naturally grows and layering it over the thinner areas covers the crown naturally.
How to use a dryer at home
With this style, more than any wax, what matters isbuilding the base with a dryer.
- In the morning, wet the hair through
- Towel off some of the water
- Dry the crown against its usual flow
- Bring the hair on top forward
- Lift only the roots of the fringe as you apply the heat
- Once the shape is there, let it cool for a moment to set the lift
The point is to get almost all the way there with the dryer, rather than forcing the shape with product.
If the dryer has done its work, the product at the end only has to tidy things up.
Powder products, which do not go greasy, also suit thinning hair
Here we used a mist product applied to wet hair before drying, which makes volume easier to build.
A lot of ordinary wax makes the hair clump, and the scalp shows through the gaps.
Some powder products hold volume across the whole head without any stickiness.
At the end we used a little dry wax on the sides and the ends, where the scalp does not show, to settle the finer hairs and the silhouette.
"That is a big change," said client M
Looking at the finish, he said:
"From the front and the side you really cannot tell."
"I thought, that is a big change."
That was his reaction.
We did not change the style dramatically, and we did not force anything out of sight.
The length at the sides, the length on top, the flow around the whorl, the direction of the dryer.
Adjust each of them a little and the crown looks quite different.
Cutting it all short is not the only answer to thinning at the crown
Plenty of people, once the crown or the whorl starts to bother them, wonder whether cutting it short would hide it.
Sometimes short is indeed the right answer.
But as here, leaving a little length on top can cover the thinner areas naturally.
What matters is not the pattern of thinning alone, but designing the cut around
- how thick the hair is
- how much of it is left
- where the whorl sits
- the way it falls
- how the sides puff out
- the shape of the head
- how you usually style it
all of it.
▶ Styles for thinning at the crown (O-shape) (Page in Japanese)
▶ Browse styles by pattern of thinning (Page in Japanese)
What a barbershop for men with thinning hair can offer
At SARUTAHIKO we do not judge by the pattern alone — M-shape, O-shape, horseshoe. We look at your hair, how it grows, the shape of your head and how you live, and propose from there.
Not simply cutting it short or growing it to hide anything, but
- where to cut short
- where to leave length
- Where to add volume
- which way to sweep the hair
- how it will look as it grows out
are all part of the cut.
If you do not know what suits thinning hair, find it hard to raise the subject at a salon, or cannot get it to work at home, come and talk to us.
FAQs
- If the crown is thin, is a short cut less obvious?
- A short cut suits some people, but shorter is not automatically less obvious. If there is still hair at the crown, keeping the length you need and layering it over the thinner areas can cover it more naturally. We judge by the extent of the thinning, the hair itself and the way it grows.
- Can a dryer alone make thinning at the whorl less noticeable?
- The flow of the hair can change the impression. If drying along the whorl leaves the hair parted, drying against it lifts the roots and lets the hair overlap, so the scalp shows less.
- I feel wax makes the thinning more obvious.
- A lot of oily wax makes the hair clump, and the scalp can show through the gaps. For thinning hair, a powder or dry product with little stickiness, chosen to suit your hair, is another way to go.
- I am not sure I can style it at home the way you do here.
- Being able to do it at home matters to us. Rather than relying on product to make the shape, we show you which direction to point the dryer and which parts to lift.
- Can I grow the top out from this length?
- You can. For client M the top is not finished as it is: it is designed so that another centimetre or two will make covering easier. Tidying the sides while it grows keeps the balance as the top comes in.











